introduction step 1 step 2 step 3 step 4 step 5 step 6 step 7 step 8 step 9 step 10 step 11 step 12 step 13 step 14 step 15 step 16 step 17 step 18 step 19 step 20	step 21 step 22 step 23 step 24 step 25 step 26 step 27 step 28 step 29 step 30 step 31 step 32 step 33 step 34 step 35 step 36 step 37 step 38 step 39 step 40 step 41 step 42	previous | next
		The point on the tailing labeled "A" is the tie in point that will be placed over the area on the hook labeled "B". The tail on this fly is a bit longer than most "traditional" dry fly tails. I use the "end" of the bend of the hook as an end point instead of the start of the bend when I measure the tail length.

join the e-mail list!

© Copyright Troutflies.com 2002 - 2003. All Rights Reserved.